Products | AerasPro IAQ Monitor, Vision Systems, Robotics

// OUR PRODUCTS

DEEP VISION ROBOTICS PRODUCTS

Proprietary vision-guided robotics, intelligent inspection systems, and IoT sensing devices — designed and manufactured in-house.

FLAGSHIP

DVR InspectAI 200

MODEL: DVR-IA-200 · INSPECTION SYSTEM

AI-powered inline visual inspection system for PCB and electronics manufacturing lines. Detects solder defects, misplacements, and surface anomalies at production speed.

Resolution25 MP

Inspection speed1200 ppm

Defect types120+

InterfaceGigE / USB3

NEW 2025

PickBot Vision 360

MODEL: DVR-PB-360 · ROBOTIC CELL

Vision-guided bin-picking robot for random-bin and bulk-feeder environments. Integrates with standard conveyor systems and ERP platforms with minimal setup time.

Payload3 kg

Cycle time< 1.2 s/pick

Localization3D Structured Light

IntegrationROS2 / Modbus

PRO

SmartEye Industrial Camera

MODEL: DVR-SE-C1 · VISION SENSOR

Ruggedised industrial camera with onboard edge inference for real-time quality detection. IP67-rated, wide temperature range for harsh factory environments.

SensorSony IMX530

Frame rate120 fps @ 5MP

RatingIP67 / -20°C~70°C

InferenceEdge AI (INT8)

PRO

FlowGuard QC System

MODEL: DVR-FG-100 · LINE MONITOR

End-to-end automated visual quality control platform. Centralises inspection data from multiple cameras, generates SPC reports, integrates with MES.

Camera nodesUp to 32

Throughput10,000 units/shift

ReportingSPC / OEE / AQL

ConnectivityOPC-UA / MQTT

NEW 2025

VisionOS Edge Platform

MODEL: DVR-VOS-E2 · SOFTWARE + HW

Edge AI inference platform with DVR's proprietary VisionOS. Supports real-time defect classification, traceability labelling, and cloud-sync for multi-site deployments.

SoCNVIDIA Orin NX 16G

ModelsONNX / TensorRT

Latency< 15 ms

OSVisionOS 2.1

PRO

SensorFusion Board SFB-1

MODEL: DVR-SFB-1 · EMBEDDED MODULE

Multi-sensor fusion development board combining IMU, barometric, load cell, and vision interfaces for embedded systems prototyping and IoT device development.

MCUESP32-S3 (Xtensa)

ADCADS1292 (24-bit)

InterfacesI2C / SPI / UART / CAN

Form factor70 × 45 mm

IoT-Based Real-Time IAQ Monitoring

SERIES: AERASPRO

The AerasPro range monitors indoor air quality in real-time, transmitting data to BMS for analytics and automated remediation. Factory-calibrated, plug-and-play metallic enclosures with in-house proprietary microcontroller boards. — Empowering with Data for Accountability.

AerasPro

STANDARD

Real-time indoor air quality — 8 core parameters via RS 485

PM1PM2.5PM10 TVOCCO₂ TemperatureHumidityAQI

Particulate Matter Sensor

TypeLaser light scattering

Range (PM1/2.5/10)0~999 µg/m³

Resolution1 µg/m³

Accuracy±5% (≤100); ±10% (>100)

CO₂ Sensor (NDIR)

Range300 – 5000 ppm

Resolution1 ppm

Accuracy±50 ppm ±2%

Response time≤5 s initial / ≤25 s total

TVOC Sensor (MOS)

Range0 – 1000 ppb

Accuracy±10%

Response time≤3 s initial / ≤60 s total

Environmental & Device

Temperature range6°C – 55°C (±0.5°C)

Humidity range20 – 90% RH (±2%)

Input voltage12 V DC

CommunicationRS 485 (2-wire)

EnclosureMetallic, plug & play

AerasPro⁺

ENHANCED

All AerasPro parameters + extended gas, environmental & wireless

PM1PM2.5PM10 TVOCCO₂ TempHumidityAQI NOxSOx OzoneHCHO COBaro. Press. Sound dBLux

All AerasPro core specs included +

Extended gas sensorsNOx, SOx, O₃, HCHO, CO

Barometric pressure300 – 1100 hPa

Air velocity0 – 30 m/s

Illuminance0 – 83000 Lux

Sound level30 – 130 dB(A)

Vibration sensingTri-axis MEMS

Wireless Communication Options

StandardRS 485 (2-wire)

Optional wirelessWiFi / BLE 4.0 / LoRa

CellularGSM / NB-IoT

MeshZigbee

Display & Device

Display options4" or 7" colour LCD

Input voltage12 V DC

Operating temp6°C – 55°C

BMS integrationModbus RTU / REST API

EnclosureMetallic, plug & play